HayesHelp.com

Concepts— This document outlines the setup instructions to connect the Ranger to a Topcon
Robot using the Hayes BanTamX Communication System. Many of these steps only need to be done during the initial setup or when the system configuration changes. There are 4 communication links to setup in addition to the Robotic profile in Survey Pro: (A) Ranger to Rover Radio, (B) Rover Radio to Instrument Radio, (C) Instrument Radio to Robotic, and (D) the RC2II setup used for Quicklock.









(A) Ranger to Rover Radio— The link to the Rover
Radio is setup through the Microsoft 5.0 PPC Operating
System as a standard Bluetooth Connection.






















(B) BanTamX Rover Radio to BanTamX
Instrument Radio Connection.
This connection is predefined and configured at
Hayes Instrument Company so that the radio pair will
only recognize each other.
The connection is established automatically when
both radios are powered on.
The status of the radio connection can be determined by
the status of LED lights.











(C) Total Station Setup— The link to the BanTamX Instrument radio is setup onboard
the Topcon 800X Robot.
Connect the BanTamX Bluetooth Radio to the total station via the 6-pin hirose radio
cable and turn the radio on.
1. From the main total station menu:
• Select the Para Menu [F6]
• Select the Communication Menu [F2]
• Select Serial Port RS232C/RC [F1]
• Select using the [F3/F4] keys
• Press Set [F1] then YES [F5]
• Select Set RC [F3]
• Verify the following settings:
∗ Channel [1]
∗ V.Search [15]
∗ RC [S]
∗ Retry [Std]
∗ Delimit [ETX]
∗ REC-A/B [B]
∗ NEZ-REC [Std]
∗ TrkState [ON]
∗ B.Rate [4800]
∗ Data.L [8]
∗ Parity [None]
∗ Stop Bit [1]
• Press SET [F1] then YES [F5]
• Press [ESC] back to the main total station menu.
2. From the Main Total Station Menu:
• Press Prog [F1] then MORE [F6]
• Press EXT.LINK [F3]
• Press 2. Setting [F2]
• Select 1. CABLE/RADIO MODEM/RC [F1]
• Using the Up/Down [F3/F4] arrow keys, select RADIO MODEM SATEL
3ASd.
• Press SET [F1]
• At the Setting menu, Select 4.PARAMETER (RADIO MODEM) [F4]
• Select 1.SELECT PARAMETERS [F1]
• Using the Up/Down arrow keys, select . Press SET [F1]
• Press [ESC]
• Select 1. Execute [F1]




(RC) RC-2II— Quick Lock Setup— The RC-2II can be used as a redundant communication
mode (see RC-2II only setup guide) but when used with the BanTamX Hayes Communication
System the RC-2II acts as a Quicklock assist to help
the gun acquire lock to the prism.
RC-2II

1. Open the battery chamber and remove the batteries. Locate the dip-switch block at the bottom of the battery chamber and verify that dip-switch 3 is to the right. The other
switches should be set the to left.

2. Put in fresh batteries if unsure about their age (typical battery life is 40 hrs).

Survey Pro Setup—
This process will set up a Robotics profile in Survey Pro and only needs to be done once.
Run Survey Pro and open a job for work.






















Download PDF here